Stripping and issues

Tie plate modified — Tie plate modified (replacement part) 120

Some restoration work required- — Some restoration work required. Full restoration of both sides 500

Air filter container needs new paint — Air filter container needs new paint, 75

Front bumper mounting brackets. All four are missing. — Front bumper mounting brackets. All four are missing. (Set of 4) 80

US crank brother with no pipe to air filter. To be replaced — US crank brother with no pipe to air filter. To be replaced 200

Engine stabilizer to be replaced — Engine stabilizer to be replaced included

Air filter mounting bracket self made edition to be replaced — Air filter mounting bracket self made edition to be replaced 30

Water outlet corrosion. To be replaced — Water outlet corrosion. To be replaced 70

Tunnel cover over gear bix broken in several places. Might cause exhaust fume in cabin. — Tunnel cover over gear bix broken in several places. Might cause exhaust fume in cabin. 100

Seized in and need replacement — Seized in and need replacement 80

Steering joint worn, to be replaced — Steering joint worn, to be replaced 40

Sway bars to be restored completely — Sway bars and prop shaft to be restored completely 250

Cooling fan motor wrong position — Cooling fan motor wrong position ? 600 including original motor with blade

Wiper motor need to be restored — Wiper motor need to be restored, 100

Front suspension need restoration — Front suspension need restoration see above

Seat rails driver side self made — Seat rails driver side self made 200

Bonnet hinges to be restored — Bonnet hinges to be restored both used 100

Further,

all clamps would have to be replaced. Full original restored set 500 € all bolts and nuts are new reproduction originals i.a. about 500 €

From here it is all good body, with no welding. Even the original light red primer is visible under the roof and tunnel

Amazingly sound floor, not one single welding spot nor corrosion. Just the floor is ditched from jacking up.

Diasassembled body